Download +tiny Firmware for your Device

NOTE: +tiny is a fork by K3PGM of the official AREDN firmware. It allows most "tiny" nodes (those with 32 MB of RAM) that were formerly supported by AREDN to continue to function in mesh networks that use the Version 4 (Babel-only) protocol. +tiny is still subject to the other restrictions of "tiny" nodes; for example, it cannot support infrastructure/access-point modes such as PtP/PtMP/station/client connections or hotspots.

It is possible, though not recommended, to use a +tiny node as a WireGuard tunnel endpoint by loading the wireguard-tools package, but the number of tunnels that can be supported is very small. Do not set up a tunnel where it would be your only access to a +tiny node; after an upgrade, the wireguard-tools package will automatically be reloaded, but manual intervention is required to reactivate the tunnel.

+tiny is offered without support and may not function properly in your mesh network; your use of +tiny is at your own risk. While an attempt will be made to track the official AREDN releases for a time, it is highly likely that continuing AREDN development will make this attempt impractical at some point and further updates of +tiny will cease.

Select the build on the right (either a specific released version, or the nightly build) then type the name or model of you device on the left. Best results are achieved by entering a more specific name.